1000 psi operating pressure for optimal misting effect using the narrowest orifice nozzles.
WM-10015MT-900CC Fogging pump
Features:
- 1000 psi operating pressure for optimal misting effect using the narrowest orifice nozzles.
- Nickel-plated forged brass manifold resists rust and corrosion.
- Patented internal rinse cooling design to increase pump life.
- Dual bearing design to lower the heat and noise level down to 75 dB.
- Automatic pressure valve controls the consistency of the pump pressure.
- Dual assembly with settings for minutes and seconds to set the misting intervals.
- Choose either Wuli’s patented stainless steel pipe or high-pressure hose for quick installation and high durability
Applications:
- Residential cooling
- Industrial cooling
- Commercial cooling
- Agriculture and greenhouse use
- Special landscaping effects
- Dust/odor control
- Air condition condenser pre-cooling
WM-10015-900CC
- 1000 psi operating pressure for optimal misting effect with 1 liter/min output.
- Nickle-plated forged brass manifold for anti-rust and corrosion.
- Patented internal rinse cooling design to increase pump life.
- Dual bearing design to lower the heat and noise level down to 75 dB.
- Automatic pressure valve controls the consistency of the pump pressure.
- Circuit breaker for electrical safety if the voltage is outside of the safety parameter
| Model | WM-1001-5 |
WM-1001-5 400cc |
| Motor (HP) | 1/4 | 1/4 |
| Volt | 230 | 230 |
| Hz | 50 | 50 |
| Dimetter | 1 | 1 |
| R.P.M | 1420 | 1420 |
| Suction Volume (L/Min) | 0.9 | 0.4 |
| Operating Pressure (Bar) | 70 | 70 |
| Operating Pressure (psi) | 1000 | 1000 |
| Nozzles No.1(46cc/min 0.15mm) | 18 | 8 |
| Dimentions (cm) | 35x20x17 | |
| Weight (kg) | 8 | |
NEW PRODUCTION
WM-1002-5 FOGGING PUMP(2L/min)
WM-1003-5 FOGGING PUMP(3L/min)
WM-1004-5 FOGGING PUMP(4L/min)
Features
· 1000 psi operating pressure for optimal misting effect with 0.5 liter/min output.
· Nickle-plated forged brass manifold for anti-rust and corrosion.
· Patented internal rinse cooling design to increase pump life.
· Dual bearing design to lower the heat and noise level down to 75 dB.
· Automatic pressure valve controls the consistency of the pump pressure.
· Circuit breaker for electrcial safety if the voltage is outside of the safety parameter.
Applications
· Residential cooling
· Industrial cooling
· Commercial cooling
· Agriculture and greenhouse use
· Special landscaping effects
· Dust/odor control
· Air condition condenser pre-cooling
WM-1003MT Fogging pump
- Mist Cooling System with Digital timer: 24 hour digital timer with 8 settings to control intervals for running and stopping the mist.
- Inlet filter: Increases the pump’s life and reduces clogged nozzles.
- Pressure Switch: The pump will automatically stop when the water supply is interrupted, protecting the pump from damage.
- Mist Cooling System with Pressure Release: Automatically releases pressure from the mist line when the pump stops to prevent leaking nozzles.
